Specially designed for travelling irrigators
Extremely low friction loss
Superior bend radius and kink resistance
For extreme uv and ozone conditions
Designed and recommended for travelling irrigators, lateral pivots, heavy duty dredge discharge, slurry, sludge and liquid manure pumping and any application where high resistance to abrasion is required.
Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant synthetic nitrile rubber & PVC blend, extruded through the weave and forming a single homogenous construction without the use of glues or adhesives.
The OROFLEX BANDAMA hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main concern. Abrasion resistance > 2000 cycles.
-4ºF (-20ºC) to 176ºF (80ºC)
No visible signs of cracking appear on the lining or cover when tested in accordance with ASTM D518 Procedure B, 100pphm/104ºF (40ºC).
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils, and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications.
As requested by the customer; Camlock, Bauer, Perrot, Victaulic, Storz, etc.
| Series Number |
Nom. Inner Diameter |
Wall Thickness |
Working Pressure | Burst Pressure |
Tensile Strength |
Nominal Weight |
Bend Radius | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | inch | mm | inch | bar | psi | bar | psi | kg | lb | kg/m | lb/ft | m | ft | |
| F552164A* | 65 | 2 1/2 | 3.0 | 0.118 | 20 | 290 | 50 | 725 | 5.320 | 11.729 | 0.85 | 0.57 | 1.20 | 3.94 |
| F550726A | 76 | 3 | 3.1 | 0.122 | 18 | 260 | 45 | 650 | 8.380 | 18.475 | 1.00 | 0.67 | 1.25 | 4.10 |
| F550748A | 90 | 3 1/2 | 3.3 | 0.130 | 16 | 230 | 40 | 580 | 9.300 | 20.503 | 1.15 | 0.77 | 1.30 | 4.27 |
| F551285A | 102 | 4 | 3.3 | 0.130 | 14 | 200 | 35 | 505 | 10.000 | 22.046 | 1.40 | 0.94 | 1.35 | 4.43 |
| F551300A | 115 | 4 1/2 | 3.4 | 0.134 | 12 | 175 | 30 | 435 | 11.500 | 25.353 | 1.60 | 1.08 | 1.50 | 4.92 |
| F551296A | 127 | 5 | 3.5 | 0.138 | 12 | 175 | 30 | 435 | 12.320 | 27.161 | 1.80 | 1.21 | 1.60 | 5.25 |
| F552211A | 152 | 6 | 3.6 | 0.142 | 12 | 175 | 30 | 435 | 15.000 | 33.069 | 2.10 | 1.41 | 1.70 | 5.58 |
* Available on minimum order quantity.
| Series Number | Nom. Inner Diameter |
Bend Radius | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| at 3 bar /43 psi | at 4 bar /58 psi | at 6 bar /87 psi | at 8 bar /116 psi | at 10 bar /145 psi | at 12 bar /174 psi | at 14 bar /203 psi | ||||||||||
| mm | inch | m | ft | m | ft | m | ft | m | ft | m | ft | m | ft | m | ft | |
| F552164A | 65 | 2 1/2 | 0.69 | 2.25 | 0.84 | 2.74 | 0.96 | 3.13 | 1.00 | 3.28 | 1.05 | 3.44 | 1.10 | 3.61 | ||
| F550726A | 76 | 3 | 0.82 | 2.67 | 0.94 | 3.08 | 1.00 | 3.28 | 1.08 | 3.53 | 1.08 | 3.54 | 1.13 | 3.71 | ||
| F550748A | 90 | 3 1/2 | 0.93 | 3.05 | 0.95 | 3.12 | 1.00 | 3.26 | 1.13 | 3.71 | 1.13 | 3.71 | 1.25 | 4.10 | ||
| F551285A | 102 | 4 | 0.97 | 3.17 | 1.09 | 3.58 | 1.20 | 3.94 | 1.25 | 4.10 | 1.33 | 4.36 | 1.35 | 4.43 | ||
| F551300A | 115 | 4 1/2 | 1.10 | 3.61 | 1.15 | 3.77 | 1.24 | 4.05 | 1.28 | 4.18 | 1.44 | 4.71 | 1.50 | 4.92 | ||
| F551296A | 127 | 5 | 1.15 | 3.77 | 1.20 | 3.94 | 1.31 | 4.28 | 1.43 | 4.69 | 1.50 | 4.92 | 1.60 | 5.25 | ||
| F552211A | 152 | 6 | 1.50 | 4.92 | 1.53 | 5.00 | 1.59 | 5.20 | 1.63 | 5.35 | 1.65 | 5.40 | 1.70 | 5.58 | ||
The actual diameter of these hoses may differ slightly from the nominal diameter specified in this chart to make sure that they can be properly assembled with the couplings. For diameter tolerance questions please contact your distributor or directly to TIPSA.
Colors
Lengths
Standard 330ft (100m) and 660ft (200m). Special lengths may be available upon request.
Oroflex Reline
Extruded TPU lay flat hose for pipe rehabilitation
Designed for water pipe network rehabilitation. This thermoplastic polyurethane (TPU) coated hose is manufactured in diameters ranging from 4” (DN125) to 20” (DN500). Its ease of expansion helps to adapt perfectly to the internal walls of the pipe to be repaired, providing an excellent wear resistance and an outstanding resistance to hydrolysis and microbiological attack.
READ MORE
