- SPECIALLY DESIGNED FOR TRAVELLING IRRIGATORS
- EXTREMELY LOW FRICTION LOSS
- SUPERIOR BEND RADIUS AND KINK RESISTANCE
- FOR EXTREME UV AND OZONE CONDITIONS
Black ribbed cover is the standard.
Designed and recommended for travelling irrigators, lateral pivots, heavy duty dredge discharge, slurry, sludge and liquid manure pumping and any application where high resistance to abrasion is required.
Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant synthetic nitrile rubber & PVC blend, extruded through the weave and forming a single homogenous construction without the use of glues or adhesives.
a. Ultimate Tensile Strength of the lining and cover: Minimum guaranteed value of 1,500 psi (10,500 kPa).
b. Ultimate Elongation: 400% minimum.
c. Accelerated Aging Test: The tensile strength and ultimate elongation of the vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa), and a temperature of 70 degrees Celsius +/-1 degree (158 ºF +/- 18 ºF) for a period of 96 hours, after which the properties of the rubber are at least 60% of the original values.
The OROFLEX BANDAMA hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main concern. Abrasion resistance > 2000 cycles.
Service Temperature Range:
-4ºF (-20ºC) to 176ºF (80ºC)
No visible signs of cracking appear on the lining or cover when tested in accordance with ASTM D518 Procedure B, 100pphm/104ºF (40ºC).
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils, and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications.
Standard 330ft (100m) and 660ft (200m). Special lengths may be available upon request.
As requested by the customer; Camlock, Bauer, Perrot, Victaulic, Storz, etc.