Specially designed for drinking water transfer in long lines & emergency delivery operations
Premium & flexible leak free hose for extreme UV and ozone conditions
Total corrosion resistance and minimum snaking when submitted to high pressures
Fully approved for potable water - NSF/ANSI/CAN. Standard 61 certified - BS 6920:2014 compliant
Designed and recommended as a drinking water transfer hose in long lines and emergency delivery operations, liquid and powder food transfer, ship/boat drinking water supply, sewer and water treatment, pipeline bypass and waste transfer.
Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant thermoplastic polyurethane extruded through the weave, forming a single homogenous construction without the use of glues or adhesives. Its construction does not permit corrosion or scaling, while giving a high resistance against abrasion and cutting. Easy handling, storage & transport, which allows for fast installation and retrieval. 2% maximum hose elongation and 10% maximum hose expansion.
The OROFLEX AQUA hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main concern. Under practical conditions, thermoplastic polyurethane is considered to be the most abrasion resistant elastomeric material.
From -58℉ (-50℃) to 150℉ (65℃), with peaks of up to 175℉ (80℃). Special versions for higher and lower temperatures available upon request.
No visible signs of cracking will appear due to the ozone. Excellent weather and UV resistance.
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications.
As requested by the customer; Bauer, Victaulic, Storz, etc.
4 to 9 below 86ºF (30ºC) and 5 to 9 from 86ºF to 122ºF (from 30ºC to 50ºC).
| Part Number | Nominal Inner Diameter |
Wall Thickness | Working Pressure | Burst Pressure | Tensile Strength | Nominal Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | inch | mm | inch | bar | psi | bar | psi | kg | lb | kg/m | lb/ft | |
| F556303A* | 25 | 1 | 1.8 | 0.071 | 17 | 240 | 50 | 725 | 2,100 | 4,600 | 0.17 | 0.11 |
| F556308A* | 40 | 1 1/2 | 2.0 | 0.079 | 21 | 300 | 63 | 900 | 4,800 | 10,600 | 0.35 | 0.24 |
| F556300A | 52 | 2 | 2.0 | 0.080 | 17 | 240 | 42 | 600 | 5,200 | 11,500 | 0.39 | 0.26 |
| F556301A* | 65 | 2 1/2 | 2.2 | 0.087 | 17 | 240 | 42 | 600 | 5,200 | 11,500 | 0.52 | 0.35 |
| F556302A | 76 | 3 | 2.3 | 0.091 | 17 | 240 | 42 | 600 | 7,400 | 16,300 | 0.64 | 0.43 |
| F556304A | 102 | 4 | 2.7 | 0.106 | 17 | 240 | 42 | 600 | 9,400 | 20,700 | 1.00 | 0.67 |
| F556307A | 152 | 6 | 3.2 | 0.126 | 17 | 240 | 42 | 600 | 17,700 | 39,000 | 1.75 | 1.18 |
| F556309A* | 203 | 8 | 4.3 | 0.169 | 14 | 200 | 42 | 600 | 35,000 | 77,200 | 3.30 | 2.22 |
| F556310A* | 254 | 10 | 4.5 | 0.177 | 14 | 200 | 35 | 500 | 45,000 | 99,200 | 4.10 | 2.80 |
| F556311A* | 305 | 12 | 4.7 | 0.185 | 12 | 175 | 30 | 435 | 55,000 | 121,300 | 5.10 | 3.43 |
| F556312A* | 305 | 12 | 5.0 | 0.197 | 14 | 200 | 34 | 500 | 70,000 | 154,300 | 5.28 | 3.55 |
| F556313A* | 406 | 16 | 5.2 | 0.205 | 12 | 175 | 28 | 400 | 80,000 | 176,400 | 7.60 | 5.11 |
* Sizes available upon minimum order.
The actual diameter of these hoses may differ slightly from the nominal diameter specified in this chart to make sure that they can be properly assembled with the couplings. For diameter tolerance questions please contact your distributor or directly to TIPSA.
The OROFLEX AQUA hose is fully approved for potable water. NSF (National Sanitation Foundation) certifies that the OROFLEX AQUA hose conforms to the requirements of NSF/ANSI/CAN Standard 61 – Drinking Water System Components – Health Effects.
Only products bearing the NSF Mark are Certified.
Colors
Lengths
Standard lengths in 660ft (200m). Also available in 200ft (61m) for 2” and 3” diameters and 330ft (100m) for 4” and 5” diameters. Longer lengths may be available upon request.
Oroflex Oil
Extruded tpu fuel & oil discharge lay flat hose
Designed and recommended for fuel and oil discharge operations in refineries, mari- time industry, chemical plants, and military installations. Ideal for brackish and seawater transfer, ship-to-shore unloading, ship-to- ship refuelling, bulk fuel discharge/loading, tank-to-tank transfer, aircraft refuelling, and home fuel delivery.
READ MORE
Oroflex Reline
Extruded TPU lay flat hose for pipe rehabilitation
Designed for water pipe network rehabilitation. This thermoplastic polyurethane (TPU) coated hose is manufactured in diameters ranging from 4” (DN125) to 20” (DN500). Its ease of expansion helps to adapt perfectly to the internal walls of the pipe to be repaired, providing an excellent wear resistance and an outstanding resistance to hydrolysis and microbiological attack.
READ MORE
