OROFLEX TMR 20
Premium Quality Extruded Rubber Lay Flat Hose
- SPECIALLY DESIGNED AS A DRAG HOSE AND MAIN FEEDING LINE
- HIGH ABRASION RESISTANCE SUITABLE FOR SLURRY, MINING, FRACKING AND DEWATERING PURPOSES
- EASE OF TRANSPORTATION AND HANDLING
- OROFLEX SERIES - THE MARKET LEADER IN RUBBER LAY FLAT HOSE
Color:
The standard colors are yellow for diameters up to 5” and black for larger sizes. 6" & 8" are typically available also in green. Other colors are available upon request.
Aplications:
Designed for heavy duty and agricultural discharge applications including dewatering, water transfer, slurry and manure spreading, irrigation, water and hydrocarbons bypass operations, compressed air applications up to 3” ID, high pressure liquid pumping, bulk powder discharge (excluding cement) and flotation booms.
Construction:
Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant synthetic nitrile rubber & PVC blend, extruded through the weave and forming a single homogenous construction without the use of glues or adhesives.
Lining Properties:
a. Ultimate Tensile Strength of the lining: Minimum guaranteed value of 1,500 psi (10,500 kPa).
b. Ultimate Elongation: 400% minimum.
c. Accelerated Aging Test: The tensile strength and ultimate elongation of the vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa), and a temperature of 70 degrees Celsius +/-1 degree (158 ºF +/- 18 ºF) for a period of 96 hours, after which the properties of the rubber are at least 60% of the original values.
Abrasion Resistance:
The OROFLEX 20 hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main concern. Abrasion resistance > 2000 cycles.
Service Temperature Range:
-22ºF (-30ºC) to 176ºF (80ºC). Special versions for higher and lower temperatures available upon request.
Ozone Resistance:
No visible signs of cracking appear on the lining or cover when tested in accordance with ASTM D518 Procedure B, 100pphm/104ºF (40ºC).
Chemical Resistance:
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils, and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications.
Lengths:
Standard 50ft (15m), 66ft (20m), 100ft (30m), 200ft (60m), 330ft (100m). Special lengths up to 660ft (200m).
Couplings:
As requested by purchaser, for liquid trans- fer (Camlock, Bauer, Perrot, Victaulic, Storz, etc.) as well as for compressed air (Ground Joint, Universal Air Hose Couplings, etc.).